Skip to content

Backup & Restore

  • Pro

Create and restore backups, and keep a tidy history in the backup library

I lost a bunch of samples once when experimenting with firmware. Never again. This was one of the first features I built. Full device backup in about 2 minutes.

Back up individual projects or your entire device, samples and project data included. Restore to the same device or a different one. Everything is preserved exactly as it was. A progress bar shows you exactly where things are at during the backup.

SmartRestore automatically skips samples that already exist on the device, so partial restores are faster and avoid unnecessary writes.

Choose from three backup scopes:

Backs up all samples assigned to a single project’s pads. Perfect for saving individual compositions or sound sets.

Use when: You want to preserve a specific project or share a project with others

Backs up all samples across all projects on your device. Comprehensive backup of your entire workflow.

Use when: You want to preserve all your projects before a firmware update or major change

Backs up every sample slot on your device, including unassigned samples. Complete mirror of device memory.

Use when: You want a complete backup before factory reset or switching devices

Step-by-step backup process:

  1. Connect your device

    Ensure your EP device is connected via USB and detected by EP-PatchStudio

  2. Navigate to Backup & Restore

    Click the Backup & Restore section in the sidebar

  3. Select backup type

    Choose One Project, All Projects or Full Device

    • For One Project: select which project to back up from the dropdown
  4. Check the sample cache

    If it’s still syncing, the app shows “Sample cache sync in progress” with a count. You can back up straight away, but it’s fastest once caching has finished.

  5. Click the backup button

    Click “Back Up Project” with the project number (or “Back Up All Projects” or “Back Up Device”, depending on your selection)

  6. Choose where it goes

    A Full Device backup is saved to Your Backups in the app. Tick “Also export a copy to disk” to save a .pak file as well. Project backups ask where to save the file.

  7. Wait for backup to complete

    The backup process will create a compressed archive containing all samples

Backup file information:

  • Full device backups use the .pak extension, single-project backups use .ppak, and All Projects saves a ZIP with a .ppak for each project
  • File size depends on the number and quality of samples

Restoring saved backups to your device:

  1. Connect your device

    Ensure your EP device is connected and detected

  2. Navigate to the Restore tab

    Go to the “Restore from Backup” section and choose Project or Full Device

  3. Select backup file

    Click “Select Project Backup” and choose a .ppak file, or “Select Device Backup” and choose a .pak file

  4. Preview backup contents

    The app will show details about the backup (sample count, date created, device type)

  5. Check what happens to clashes

    Samples already on the device are skipped. By default, backup samples that clash with a different sound go to free slots, so nothing is replaced. Tick “Replace the sounds already in these slots” to take those slots back. The sounds it replaces go to the Recycle Bin first.

  6. Confirm and restore

    Click “Restore to Project” (with the project number) or “Restore Full Device” and confirm

  7. Wait for transfer

    Samples will be transferred to your device via USB MIDI. This may take several minutes for large backups.

Warning: Restoring Can Change Your Device

By default nothing is replaced: clashing samples go to free slots. If you choose to replace sounds, they go to the Recycle Bin first. Back up your current device before a full restore if you want to keep its state exactly.

Every full device backup you take is kept in an in-app library, so you’re not hunting through folders for the right file. Project backups are saved as files and aren’t kept here. Under Your Backups you get a list, newest first, ten to a page. Each row shows the date, which device it came from and its size. From the row you can restore, export a copy to disk or delete it.

Toggle between This Device and All Backups to narrow the list to the connected device or see everything you’ve got. When you’re viewing all backups, each row uses the nickname you gave the device, so a backup reads as “gig 40” rather than a serial number.

Any backup can take tags. Tag the one you made before a firmware update, or the clean starting point you keep coming back to, and you can pick it out of a long list in a second. Tags are just labels, so use whatever wording makes sense to you.

To stop the library growing forever, EP-PatchStudio auto-prunes: it keeps the five most recent backups per device and clears out older ones as new ones come in. To protect a backup from that, pin it. Pinned backups show a Kept badge and are never auto-removed, so your known-good baseline stays put no matter how many everyday backups pile up on top. The backup you’ve just taken is always safe too, even if it tips you over the limit.

The library shows its total size and warns you if it grows past a couple of gigabytes, so a stack of full-device backups doesn’t quietly eat your disk.

EP-PatchStudio uses a sample cache system to speed up backup operations:

  • Auto-sync on connect: The sample cache starts syncing automatically in the background when your device connects
  • Cache status: Settings shows “Caching samples: X / Y” with a progress bar during sync, and the backup screen shows “Sample cache sync in progress”
  • Cache storage: Cached samples are stored in the app’s local database (IndexedDB)
  • Rebuilding cache: If samples change on device, the cache automatically rebuilds

The cache system means subsequent backups are much faster, as samples don’t need to be re-downloaded from the device.

Wait for Caching to Complete

Backups are fastest once caching has finished. The cache notice on the backup screen goes away when it’s done.

  • Regular backups: Create backups before major changes to your device
  • Name your backups: Use descriptive filenames with dates (e.g., “EP40-LiveSet-2025-01-16.pak”)
  • Store backups safely: Keep backups on external drives or cloud storage
  • Before firmware updates: Always create a full device backup before updating firmware
  • Keep your multisample files: On EP-40 firmware 2.5, the EP doesn’t send a multisample’s zones back over USB. EP-PatchStudio fills them in for the factory multisamples and for any multisample it sent from this computer, so those back up whole. Any other multisample is saved with its audio and settings but not its key map, and a restore brings it back as a single sample. When the backup finishes, the app names those slots, and it asks before clearing samples or projects, or a Factory Reset, would lose them. Keep the original files, or your Library copy, so you can send them again
  • Project-specific backups: Save individual projects as backups to share with collaborators
  • Test restores: Occasionally test restoring backups to verify they work correctly
  • Don’t disconnect during backup: Wait for the backup process to complete before unplugging

Create a full device backup of your live set. If anything goes wrong during soundcheck or performance, you can quickly restore to a known-good state.

Back up a single project as a .ppak file. The .ppak bundles the project and its samples together, so you can send it to someone else and they can restore it to a slot on their device, exactly as you made it.

Back up your current EP and restore to a new or different device. All your samples transfer with the backup.

Create a full device backup before updating your EP’s firmware. If the update causes issues, you can restore your samples.

Back up your current setup before trying new sample libraries or making major changes. You can always restore if you don’t like the results.

Backup fails or hangs

  • Ensure device is connected and not sleeping
  • Check USB cable connection
  • Wait for sample caching to complete
  • Try restarting the app and reconnecting

Restore doesn’t complete

  • Verify backup file isn’t corrupted
  • Ensure device has enough free space
  • Check USB connection stability
  • Try restoring in smaller batches (project by project)

Cache won’t rebuild

  • Restart the app and reconnect your device
  • Check available disk space on your computer
  • Export diagnostic logs and contact support if the issue persists

Backup file won’t open

  • Verify the file has the .pak or .ppak extension
  • Check file isn’t corrupted or incomplete
  • Ensure you’re using a compatible version of EP-PatchStudio

Full device backup in about 2 minutes. One click. 14 days of Pro, no sign-up.

Occasional emails about new apps, features and releases.